SWIS™ Microscope Pre-Order Sales Agreement (Deposit)
Order Details
The purchaser legal entity, contact name, title and email, billing address, ship-to address and country, quantity of SWIS Microscopes, case selection, shipping selection and carrier account (if applicable) entered at checkout, together with the order confirmation, form the order details for this Agreement. Preorder payment: US $1,000 deposit per microscope. The agreed unit price, total purchase price and final balance are stated in the order confirmation or invoice.
The purchaser acknowledges that the Personal Carry Case is NOT approved for checked airline baggage. Shipping, insurance and applicable taxes/duties are additional. Full payment is required before shipment.
1. Irrevocable Purchase Commitment
This Agreement constitutes a binding, legally enforceable, and strictly irrevocable commitment by Purchaser to purchase the SWIS™ Microscope(s) identified in the applicable order. Execution or electronic acceptance creates an immediate obligation to accept and pay for the product(s), subject only to the express Seller shipment-default remedy in Section 5 and applicable law.
2. Deposit
A deposit of US $1,000 per microscope is due when the preorder is placed. Each deposit is credited against the purchase price of the corresponding microscope. Except as provided in Section 5 and to the extent permitted by applicable law, the deposit is non-refundable.
3. No Cancellation and Purchaser Default
Purchaser acknowledges that the order cannot be cancelled, modified, rescinded, or revoked except in the event of Seller’s unexcused failure to ship under Section 5 or as required by applicable law. If Purchaser repudiates the Agreement, refuses conforming delivery, or fails to complete payment, Seller may invoice the balance and pursue available legal or equitable remedies, subject to applicable law, including applicable rules governing damages and mitigation. No change or accommodation by Seller is effective unless agreed in writing.
4. Payment and Final Balance
Purchaser shall pay a US $1,000 preorder deposit per microscope, with the remaining purchase price due before shipment. Seller will invoice the outstanding balance and applicable shipping, insurance, and taxes when the microscope(s) are ready to ship. Payment is due within ten (10) business days of invoice issuance, in cleared funds, and all sums due must be paid before shipment. Seller may grant extensions in writing. Following an overdue-payment notice and reasonable opportunity to cure, Seller may reallocate reserved units without waiving its contractual remedies. Seller accepts payment methods it authorizes, including ACH/bank transfer or credit card. Refunds, if due, will ordinarily be issued by the original payment method where practicable.
5. Estimated Shipment; Ninety-Day Deadline
Estimated readiness for shipment is four (4) to six (6) weeks after preorder acceptance, not a guarantee. Subject to timely payment and Purchaser cooperation, Seller will tender the microscope(s) to the designated carrier within ninety (90) calendar days after receipt of the applicable preorder deposit. The 90-day period measures carrier tender, not arrival or customs clearance. Customs holds, carrier delays, and import processing after timely carrier tender do not alone trigger cancellation under this section. Delays attributable to Purchaser—including overdue payment after the ten-business-day payment window, missing shipping/import details, or requested shipment deferral—extend the deadline only for the period reasonably attributable to the delay. Seller’s issuance of an invoice does not itself extend the deadline. If Seller fails to tender affected units by the applicable deadline, Purchaser may cancel those units by written notice, and Seller will refund all sums paid toward those units (including deposits and any additional amounts paid) within thirty (30) calendar days. This remedy is subject to applicable law and does not displace Seller’s separate obligations for transit loss or damage.
6. Intended Use
The SWIS™ Microscope is currently sold for educational, demonstration, and surgical training purposes only. It is not represented, authorized, or intended for clinical patient use or surgery on patients unless Seller expressly authorizes that use in writing and all applicable regulatory requirements have been satisfied.
7. Limited Warranty and Service
Seller provides a one-year limited warranty, beginning on delivery, against defects in materials and workmanship under normal intended use, subject to mandatory purchaser protections under applicable law. Seller may repair or replace covered defective components at its discretion, subject to Section 8 and applicable law. Purchaser must contact Seller for a return merchandise authorization (RMA), provide proof of purchase and a description of the issue, and permit reasonable remote troubleshooting before returning a product. Purchaser initially pays reasonable standard inbound shipping; for a confirmed covered defect Seller will reimburse reasonable standard inbound shipping and pay standard return shipping after repair/replacement. Purchaser must securely package returned equipment using original packaging or comparably protective packaging. International import duties, VAT and customs charges associated with returns ordinarily remain Purchaser’s responsibility, except costs caused by Seller error or where applicable law requires otherwise. Warranty excludes misuse, neglect, accidental damage, unauthorized repairs or alterations, improper power or environment, normal wear, and damage resulting from improper packing, checked baggage handling of the Personal Carry Case, or other transit mishandling. Such exclusions apply to resulting damage and do not automatically void coverage for unrelated manufacturing defects. The microscope, screen, and camera will carry serial numbers or lot identifiers. As a condition of this voluntary limited warranty, the original serial-number or lot-identification label on each applicable microscope, screen, and camera component must remain attached, intact, and legible when warranty service is requested. A missing, detached, damaged, altered, or illegible identifier makes the affected component ineligible for voluntary warranty coverage because Seller cannot reliably verify its production history or warranty period, regardless of whether the label was intentionally removed or became detached through use. Seller may, at its sole discretion, honor a claim when its own records independently establish eligibility. Nothing in this provision limits rights that cannot be excluded under applicable law.
8. Limitations of Warranty, Remedies and Liability
Except for the express limited warranty in Section 7, and to the extent permitted by applicable law, Seller disclaims all other express, implied, or statutory warranties, including merchantability and fitness for a particular purpose. Subject to Section 5 and non-waivable law, Purchaser’s exclusive remedy for a covered product defect or nonconformity is, at Seller’s option, repair, replacement, or refund of amounts actually paid for the affected product. To the extent permitted by law, Seller is not liable for consequential, incidental, indirect, special, punitive, or exemplary damages, including lost profits, business, data, or use. Seller’s total aggregate liability arising from the Agreement shall not exceed the purchase price actually paid for the affected products, except where such limitation is prohibited by law. These limitations do not negate the express shipment-default refund or obligations concerning insured transit loss under Section 9.
9. Case Selection; Shipment; Insurance and Risk
Each microscope includes one selected case: (a) Protective Hard Case, suitable for personally accompanied transport, checked baggage, or properly packed commercial shipment, subject to carrier/airline restrictions; or (b) Personal Carry Case, designed for personally accompanied transport and cabin carriage where permitted, and NOT approved for checked airline baggage. Customers who check the Personal Carry Case assume the resulting risk of loss or damage; resulting checked-baggage damage is excluded from warranty. The Personal Carry Case may be shipped only within a suitable outer carton with adequate protective cushioning and immobilization; the case alone is not sufficient shipping packaging. Neither case is guaranteed to meet any airline’s cabin baggage rules. For Seller-arranged shipments, Purchaser pays freight and insurance; Seller arranges full-invoice-value transit coverage and bears transit risk until delivery at the agreed destination. For international Seller-arranged shipments, DAP (named destination shown on order/invoice), Incoterms® 2020, is the intended default, subject to any written shipping confirmation. For Purchaser-nominated carrier/account shipments, Purchaser pays carriage and arranges coverage for the full invoice value; risk passes upon proper tender to that nominated carrier, to the extent permitted by law. Purchaser must confirm adequate coverage in writing before dispatch. Purchaser should report visible transit damage within five (5) business days of delivery, preserve packaging and assist with claims; this reporting request does not waive mandatory rights. Seller handles claims for Seller-arranged shipments; Purchaser handles claims on its nominated carrier account. US sales/use taxes and international VAT, customs duties, import taxes, clearance charges and fees are additional and Purchaser’s responsibility unless expressly included in writing. For international shipments, Purchaser must monitor carrier and customs notifications, promptly provide requested clearance information, pay applicable import duties, taxes, brokerage and clearance charges, and accept or arrange timely collection of the shipment. If a shipment is refused, unclaimed, held or returned because Purchaser fails to meet those obligations or supplies inaccurate or incomplete import or delivery information, Purchaser is responsible for reasonable resulting charges actually incurred by Seller, including storage, return freight, carrier assessments, re-export or re-import charges, and reshipment freight and insurance. Seller will provide an itemization of such charges and will not reship until applicable amounts are paid. This does not apply to charges caused by Seller’s error, improper documentation or other failure to perform its obligations, or where mandatory law requires otherwise. Seller may make nonmaterial improvements to specifications before shipment without materially reducing agreed functionality.
10. Support and Product Information
Seller will provide standard setup instructions or video and reasonable remote setup assistance without a separate fee. Product specifications, selected case, included accessories and quantities are those stated in the accepted order and associated product listing/specification sheet, as updated for nonmaterial improvements. Any additional services must be agreed in writing.
11. Arbitration, Governing Law and Fees
This Agreement is governed by California law, without regard to conflicts rules, except to the extent mandatory law applies. Disputes arising out of or relating to this Agreement shall be finally resolved by binding arbitration administered by the American Arbitration Association under its Commercial Arbitration Rules before one neutral arbitrator, seated in Ventura County, California, in English, except where mandatory law requires otherwise. Judgment may be entered in a court of competent jurisdiction. To the extent permitted by law, parties waive jury trial and class or representative proceedings. The prevailing party may recover reasonable attorneys’ fees and arbitration costs to the extent authorized by applicable law and the arbitrator. [COUNSEL TO CONFIRM VENUE, INTERNATIONAL APPLICATION, AND FEE ALLOCATION.]
12. Authority; Notices; Entire Agreement
The person signing or accepting on behalf of Purchaser represents that they have sufficient purchasing, budget and organizational authority to bind Purchaser. Seller is InsEYEt, LLC dba SimulEYE, 5776-D Lindero Canyon Road, Suite 205, Westlake Village, CA 91362, USA. Formal notices to Seller must be sent to this address and any designated notice email listed on the invoice or order confirmation. This Agreement, the accepted order details and referenced product specifications constitute the agreement concerning this purchase; changes require written agreement, except permitted nonmaterial product improvements. If a provision is unenforceable, remaining provisions remain effective to the extent legally possible.
Electronic Acceptance
[PROPOSED WORDING, FOR COUNSEL REVIEW] By checking the acceptance box and placing a pre-order on simuleye.com, Purchaser accepts this Agreement electronically, and the person placing the order confirms the authority described in Section 12. Seller will send an order confirmation that records the order details and the date of acceptance.